INA ZAXFM0535 bearing

All our bearing ensure quality

please contact Email for any inquiry sales@tanchin.hk INA ZAXFM0535

d:   5                  

D:   35                The bearing outer ring is blue anodised.

B:   12                  

d₁:   4,3           

M_m:   0,0067         Mass moment of inertia for rotating inner ring and integral setting nut

t:   14           

:        Tolerances of the adjacent construction:
Shaft tolerance: h7
Thread tolerance: 6g (fixing thread on spindle for bearing inner ring)
Housing tolerance: H8

  KGT6X1  :   KGT6X1         Recommended ball screw drive to DIN 69 051

  TR8X1,5  :   TR8X1,5         Recommended trapezoidal lead screw drive to DIN 103

H₁:   6           

M_m:   2         Grub screw to DIN 913

d₃:   3,2           

d_{a max}:   11           

d₂:   20           

c_aL:   350         Axial rigidity

n_{G Fett}:   2000         Limiting speed

H₂:   8           

C_a:   3400         Basic dynamic load rating, axial

H:   22           

C_0a:   7800         Basic static load rating, axial

P 0 per = 0,5 x C 0a

J:   28           

m:   39         Mass

1):        Lubricant feed

  M4  :   M4         Fixing screws to DIN 912

Tightening torque of fixing screws according to manufacturers data.
Screws to DIN 912 not included in delivery.

:        The needle roller cages are made from plastic.
Permissible operating temperature: +120°C (continuous operation)

D_{a min}:   21           

m:   M5           

M_RL:   2         Bearing frictional torque

ATTENTION: For dimensioning, a starting frictional torque of 2 to 3 x M RL must be taken into consideration. The table values are guide values at a measurement speed of approx. 5 1/min.

  0,03  :   0,03         Axial runout accuracy

ATTENTION: For dimensioning, a starting frictional torque of 2 to 3 x M RL must be taken into consideration. The table values are guide values at a measurement speed of approx. 5 1/min.

W:   2         Grub screw to DIN 913

Type:   INA Axial conical thrust cage needle roller bearings