INA ZKLR0624-2Z bearing

All our bearing ensure quality

please contact Email for any inquiry sales@tanchin.hk INA ZKLR0624-2Z

d:   6                Tolerance: -0,008

D:   20,5                Tolerance: +0,03 / -0,01

H:   13                Tolerance: -0,5

C_0a:   1250         Basic static load rating, axial

X:        Axial abutment area of outer ring

d_a:   8           

M_A:   2         Tightening torque
Only valid in conjunction with INA precision locknuts

A₁:   24           

M_m:   0,0014         Mass moment of inertia for rotating inner rings

n_{G Fett}:   7300         Limiting speed for grease lubrication

C_r:   3850         Basic dynamic load rating, radial

r_min:   0,3           

  7  :   7         Axial runout
The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.

C_a:   1340         Basic dynamic load rating, axial

m:   23         Mass

:        Locknuts must be ordered separately.

b:   6,6           

  ZM06  :   ZM06         Designation of recommended INA locknut
The locknut is used to axially locate the bearing unit. It has no influence on the bearing preload.

D_ai:   16           

M:   32           

A₂:   35           

d₁:   10,4           

  4 x M4 / 2 x M6  :   4 x M4 / 2 x M6         Quantity x size of fixing screws to DIN 912
Tightening torque of fixing screws according to manufacturers data.
Screws not included in delivery.

C_0r:   1870         Basic static load rating, radial

D_{aa min}:   19           

B:   12         Tolerance: +0,25

d₂:   4,5           

n:   15           

c_aL:   17         Axial rigidity
Statistically determined mean values from measurements on the complete bearing.

m:   26           

M_RL:   0,04         Bearing frictional torque

Type:   INA Bearings for screw drives