please contact sales@tanchin.hk for any inquiry
Plane thrust bearings in the assembly mainly bear axial load, its wide range of applications. Although the thrust of SKF bearings installation operation is relatively simple, but the actual maintenance is still often wrong, that is, SKF bearings tight ring and loose ring installation location is not correct, the results of the SKF bearings lose their role, the journal was quickly worn. Tight ring inner ring and journal for the transition with the shaft when the rotation of the tight ring, and with the static parts of the friction occurred in the axial force (Fx), the friction torque will appear greater than the diameter of the resistance torque, resulting in tight Ring and shaft with the surface forced rotation, exacerbate journal wear.
Therefore, the thrust of SKF bearings should pay attention to the following points.
(1) distinguish the SKF bearings of the tight ring and loose ring (according to the size of SKF bearing diameter to determine the difference between the aperture O.1 ~ O.5mm).
(2) to distinguish the rest of the body (that is, no movement of the components, mainly refers to the assembly).
(3) No matter what the situation, SKF bearings loose ring should always be on the end of the static parts.


please contact sales@tanchin.hk for any inquiry
PREVIOUS:Bearing side cover packing Improvement        

F682X F692X F602 F694Z F695Z F696Z F697Z F698Z F699Z F604Z F605Z F606Z F607Z F608Z F624Z 6032DU 6030V 625VV 6032DDU 626DD